missing translation for 'onlineSavingsMsg'
Learn More
Learn More
METTLER TOLEDO™ Ion Selective Electrodes (ISE)
A selection of ISE probes for detecting concentration of various free ions.
$1459.39 - $2774.17
Specifications
| Length (English) | 4.75 in. |
|---|---|
| Length (Metric) | 120 mm |
| Material | Epoxy |
| Type | Ion Selective Electrode |
| Catalog Number | Mfr. No. | Connector Types | Model | Measurement Range | Price | Quantity | |||
|---|---|---|---|---|---|---|---|---|---|
| Catalog Number | Mfr. No. | Connector Types | Model | Measurement Range | Price | Quantity | |||
|
01-928-242
|
METTLER TOLEDO™
51344706 |
BNC | perfectION CI- Combination Electrode | 1.8 to 35500 mg/L |
Each for $2,227.86
|
|
|||
|
01-928-241
|
METTLER TOLEDO™
51344703 |
BNC | perfectION Ca+2 Combination Electrode | 0.02 to 40100 mg/L |
Each for $2,375.91
|
|
|||
|
01-928-243
|
METTLER TOLEDO™
51344709 |
BNC | perfectION CN- Combination Electrode | 0.2 to 260 mg/L |
Each for $2,343.00
|
|
|||
|
01-928-244
|
METTLER TOLEDO™
51344712 |
BNC | perfectION CU2+ Combination Electrode | 6.4 x 10-6354 mg/L |
Each for $2,761.06
|
|
|||
|
01-928-240
|
METTLER TOLEDO™
51344700 |
BNC | perfectION Ag+/S2- Combination Electrode | Ag+: 0.01 to 108000 mg/L; S2-: 0.003 to 32000 mg/L |
Each for $2,124.90
|
|
|||
|
01-928-245
|
METTLER TOLEDO™
51344715 |
BNC | perfectION FI- Combination Electrode | 0.02 mg/ - saturated solution |
Each for $2,023.78
|
|
|||
|
01-928-246
|
METTLER TOLEDO™
51344718 |
BNC | perfectION I- Combination Electrode | 0.005 to 127000 mg/L |
Each for $2,180.92
|
|
|||
|
01-928-249
|
METTLER TOLEDO™
51344727 |
BNC | perfectION NO3- Combination Electrode | 0.1 to 14000 mg/L |
Each for $2,180.92
|
|
|||
|
01-928-247
|
METTLER TOLEDO™
51344721 |
BNC | perfectION K+ Combination Electrode | 0.04 to 39000 mg/L |
Each for $2,544.63
|
|
|||
|
01913207
|
METTLER TOLEDO™
51340263 |
S7 BNC Cable | perfectION DX223-Na+ Half-Cell Electrode | 1.0 to 1 x 10-7 mol/L |
Each for $1,556.42
|
|
|||
|
01-928-259
|
METTLER TOLEDO™
51344724 |
S7 BNC Cable | perfectION Na+ Combination Electrode | 0.002 to 23000 mg/L |
Each for $1,459.39
|
|
|||
|
01-920-48
|
METTLER TOLEDO™
51340400 |
S7 BNC Cable | perfectION DX235-Cl- Half-Cell Electrode | 1.0 to 1.0-5 mol/L |
Each for $2,302.40
|
|
|||
|
01-928-250
|
METTLER TOLEDO™
51344730 |
BNC | perfectION Pb2+ Combination Electrode | 0.2 to 20700 mg/L |
Each for $2,774.17
|
|
|||
Description
- Prior to first use, rinse the electrode with distilled water and soak it in the appropriate standard for 24-48 hours and then fill with reference electrolyte (refer to table above)
- ISA (Ionic strength adjuster) solution required to be added to all calibration standards and samples prior to measurement for accurate results
- Refer to electrode user manual for appropriate ratio of ISA solution to sample volume
- Add filling solution each day before using the electrode (at least 2.5 cm above sample level in beaker)
- Be sure to screw cap tightly immediately after use
- The filling solution inside the electrode should not be allowed to evaporate, as crystallization will result
- For storage between measurements and up to three days, store in the appropriate standard
- For long-term storage, refer to specific ISE electrode user manual
- Sensing membrane will wear over time; each membrane can last about six months with normal use, but actual lifespan will depend on the type of samples that are being measured
- Competing ion interferences are common. Refer to ISE electrode user manual for potential interferences
- Compatible with METTLER TOLEDO SevenExcellence Benchtop, Seven2Go, and SevenGo Portable
- Compatible with InMotion Autosampler to automate measurement and cleaning of up to 303 samples
Specifications
| 4.75 in. | |
| 120 mm | |
| Epoxy | |
| Ion Selective Electrode |