missing translation for 'onlineSavingsMsg'
Learn More
Learn More
Labconco™ XPert™ Weigh Box
Protects operator when weighing hazardous samples
Supplier: Labconco™ 5220300
Includes:
- Integral neoprene gloves (size 9.75, 30 in. (76cm) long, 15mil gauge)
- 22w fluorescent lamp
- Interior ceiling-mounted electrical duplex receptacle with 5A (115V model) or 2A (230V model) circuit load
- Built-in blower with speed control capable of airflow from 13 to 100cfm
- Antistatic ionizer fan mounted on interior ceiling
- Switches for light, blower, and innermost interior receptacle wired for ionizer fan
- Balance vibration isolator, consisting of marble slab with isolator pads and Type 304 stainless-steel cover
- Inlet and outlet HEPA filters and test port for challenging HEPA filter
- Main chamber static pressure gauge to monitor HEPA filter loading integrity
Requires : Supporting base (see 10-358-108, -109)
Description
In addition to HEPA inlet and outlet filters, box includes an anti-static ionizer fan to reduce static charge and a balance vibration isolator.
Design Features
- One-piece molded, medium-density polyethylene shell
- Dry powder-coated steel superstructure and interior shelf of transfer chamber
- Approx. 13 cu. ft. main chamber
- 0.26 in. thick (0.64cm) laminated safety glass viewing window with powder-coated steel frame and neoprene gasket; cut-out is 26.38 x 12.5 in. (67.1 x 31.8cm)
- Upward-pivoting inner and outer transfer chamber doors counterbalanced and equipped with quick-latches
- Black, chemical-resistant phenolic core work surface sealed to glove box floor
- Dual HEPA filters boast 99.99% efficiency against particulates down to 0.3 microns
- 0.05ppm or lower average tracer gas levels detected during perimeter scan testing surpasses ASHRAE™ 110 standards
- Factory testing with mass spectrometer reveals no detectable leaks greater than 1 x 10-3mL/sec. when tested while glove box is pressurized with helium at 1 in. water gauge
- Vibration is less than 1.5 x 10-5 inches displacement when measured at work surface at both minimum and maximum airflow volumes
Order Info
- Overall dimensions: 31.62L x 52.75W x 40 in.H (80 x 134 x 102cm)
- Main chamber interior measures 27.5D x 33.5W x 25 in.H (69.9 x 85.1 x 63.5cm)
- Transfer chamber is 11 in. nominal I.D. x 12 in.L (28 x 30cm)
- Vibration isolator slab measures 20.38D x 13.38W x 2.85 in. thick
- Shipping weight: 350 lb. (159kg)
Certifications
ETL listed
Specifications
| Glove Box | |
| 31.6 in. | |
| 40 in. | |
| 52.7 in. |
| HEPA | |
| 80 cm | |
| 102 cm | |
| 134 cm |